Atlas Copco GA 11+ Instruction Book page 36

Setpoint 2
Starting from the Machine Settings menu, swipe left until the Setpoint 2 screen is shown.
To select a load and unload setpoint, or to modify the values, see section
setting.
Regulation
Starting from the Machine Settings menu, swipe left until the Regulation screen is shown.
To select a menu item, or to change the setting, see section
Control Mode
Starting from the Machine Settings menu, swipe left until the Control Mode screen is shown.
Following control modes are available:
• Local control through start/stop buttons
• Remote control through digital input(s)
• LAN control through UDP ethernet commands.
When in Remote or LAN control, the start/stop buttons on the controller will not work.
To change the setting, see section
Auto Restart
Starting from the Machine Settings menu, swipe left until the Auto Restart screen is shown.
34
Select or modify a setting.
Select or modify a
Select or modify a setting.
Instruction book
2920 7118 31