Recommended Tools And Supplies; Installing The Cisco Ubr10012 Chassis In The Rack; Table 3-1 Tools And Supplies - Cisco Universal Broadband Router uBR10012 Hardware Installation Manual

Chapter 3 Installing the Cisco uBR10012 Router
Tip If you are installing the chassis in an equipment rack, it is helpful to have a third person available to
maneuver the chassis into position and attach the brackets to the rack.

Recommended Tools and Supplies

Table 3-1
Table 3-1
Quantity
1
1
1
12
1
—
—

Installing the Cisco uBR10012 Chassis in the Rack

When you are installing the chassis in a rack, please be aware of the following issues.
•
•
If you are using the optional AC-input power shelf, do not install the shelf until after you have installed
Caution
the Cisco uBR10012 chassis to avoid the possibility of crushing the shelf during the router's installation.
For more information about installing the power shelf, see 2400W AC-Input Power Shelf for the
Cisco uBR10012 Universal at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr10012/installation/field_replaceable_units/ub10acsh.
html
A fully populated chassis weighs approximately 230 lbs (104.3 kg) and should be lifted only with a
Caution
forklift or hydraulic lift. A depopulated chassis weighs approximately 55 lbs(24.95 kg) and should be
lifted by two people. When handling the chassis, always follow proper lifting practices, as outlined in
the
Two people are required to lift the chassis. Grasp the chassis underneath the lower edge and lift with
Warning
both hands. To prevent injury, keep your back straight and lift with your legs, not your back. Statement
210
OL-18259-09
lists the tools, equipment, and supplies necessary to connect the system ground to the chassis.
Tools and Supplies
Description
Number 2 Phillips screwdriver
A 3/16-inch flat-blade screwdriver s
A 1/4-inch flat-blade screwdriver
Mounting bracket screws
ESD-preventive wrist strap
Tape measure (optional)
Level (optional)
AC power shelf installation precautions
Loaded and unloaded chassis weight
"Chassis-Lifting Guidelines" section on page 2-3
Comments
—
—
—
Included in accessory kit
—
—
—
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
Mounting the Chassis in the Rack
3-15