Connecting Cable Interface Line Cards and Network Uplink Cards
Connecting Cable Interface Line Cards and Network Uplink
Cards
Because there are very specific requirements for cabling the different line cards and uplink cards used
with the Cisco uBR10012 CMTS, please review the documentation for the cards that you are installing
in your system.
Cable Interface Line Card Connections
For cabling instructions, refer to the appropriate cable interface line card documentation at the following
URL:
http://www.cisco.com/en/US/products/hw/cable/ps2209/prod_installation_guides_list.html
Network Uplink Cable Connections
These cards use fiber optic connections which require specific cleaning and preparation before they are
cabled. For cleaning and inspecting instructions for the fiber optic connections, see Inspection and
Cleaning Procedures for Fiber-Optic Connections at the following URL:
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml
For cabling instructions, refer to the appropriate network uplink card documentation at the following
URL:
http://www.cisco.com/en/US/products/hw/cable/ps2209/prod_installation_guides_list.html
Warning
Class 1 laser product. Statement 1008
Warning
Invisible laser radiation present. Statement 1016.
Because invisible laser radiation may be emitted from the aperture of the port when no cable is
Warning
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 1056.
Warning Statement for Sweden
Warning
Osynlig laserstrålning när denna del är öppen och förregleringen är urkopplad. Rikta inte blicken in
mot strålen. Statement 36.
Warning Statement for Finland
Warning
Alleviates ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Äjä katso
säteeseen. Statement 35
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
3-56
Chapter 3
Installing the Cisco uBR10012 Router
OL-18259-09