Table of Contents
Advertisement
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and any possible damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
5.2 Assembling the product
The adaptor (495G and/or 495F) may need to be unscrewed from the light inlet socket
depending on which battery light source is used.
1.
Screw the LED battery light source onto the light inlet socket.
2.
Fit the tube holder to fix the tube in place during intubation.
3.
Fix the tube holder in place by turning the knurled screw clockwise.
The tip of the endoscope must always be covered by the endotracheal tube during
intubation.
Instructions for use • Retromolar Intubation Endoscope • PNO714_EN_V2.0_10-2021_IFU_CE-MDR
Preparation
11
Advertisement
Table of Contents
