Table of Contents
Advertisement
Connected Devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter to System Settings
Bluetooth
Note:
Elo mobile POS supports Bluetooth 5.1 Classic/LE and Beacon; to remain PCI-PTS compliant, only devices supporting Bluetooth Security Mode -4
(Authenticated Link / Secure Connection) can be paired and connected to the Elo mobile POS.
Note:
Make sure the BT device is on discoverable.
•
Tap Connection preferences.
•
Tap Bluetooth.
•
Tap toggle switch to ON
.
•
Tap + Pair new device.
•
From Available devices screen, tap a device to pair.
•
When a pairing request message appears.
Verify the pairing number is the same.
If the pairing requests a PIN, enter the PIN.
•
Tap PAIR, to connect.
•
When the Bluetooth device is successfully connected to mobile POS, the connection will show as Active or Connected.
Unpair a paired Bluetooth Device
•
Navigate back to 'Connected devices' screen, from AVAILABLE MEDIA DEVICES or PREVIOUSLY CONNECTED DEVICES.
•
Tap
settings of the connected device.
•
In the settings menu, it is possible to DISCONNECT, FORGET (to unpair the device) and to enable and disable Phone calls, Media audio and Contact sharing.
Cast
This allows to mirror Elo mobile POS screen on a wireless display device (e.g., Smart TV).
Note:
Make sure the wireless display capable device and mobile POS are on the same wireless network. See Network & Internet connection section of this user
manual.
•
Tap Connection preferences.
•
Tap Cast.
User Manual – Elo M60 Pay Mobile POS M60 / M60C / M60S / M60SC
→ Connected devices
UM600609 Rev C page 44 of 115
Advertisement
Table of Contents
