Test Devices; Touchscreen; Calibration - Elo TouchSystems 17A2 User Manual

17" lcd multifunction touchcomputer

Hide thumbs Also See for 17A2:

Table of Contents

Test Devices

The touchcomputer can be pre-installed with several different hardware options. To test

an optional device that is installed on the touchcomputer, follow the instructions below.

NOTE: Testing icons are located on the desktop. Testing of a particular device can

only be done after the device is properly installed.

Testing the Touchscreen

The touchscreen is pre-calibrated for accurate touch response.

If for any reason the touchscreen needs to be re-calibrated, double-click the Touchscreen-

Test icon. The window shown below will open.

Click on the Align button. This launches the calibration program. The window shown

below will open. Follow the instructions to calibrate the touchscreen.

*Calibration may not be applicable for all touch technologies.

Elo TouchSystems 17A2 User Guide 14

Table of Contents

Esy17a2