Table of Contents
Advertisement
Hotspot & Tethering
Wi-Fi hotspot
This feature is for sharing Internet network connection with another device using Wi-Fi.
Note:
The mobile POS must be connected to Wi-Fi or cellular network (cellular SKUs). See Network & Internet connection on this user manual.
•
Tap Hotspot and tethering.
•
Tap Wi-Fi hotspot.
•
Tap toggle switch to ON
.
•
Tap
QR code.
•
The QR code is for another device to scan the password for easy connect.
•
To enter manually the password, tap Hotspot password
USB tethering
This feature is for sharing Internet connection to another device using a USB cable.
Note:
The USB cable must be connected first from mobile POS to another device or PC. See Connected device → USB on this user manual.
•
Tap Hotspot and tethering.
•
Tap USB tethering, to enable
Bluetooth Tethering
This feature is for sharing internet network connection to another device using Bluetooth.
Note:
The Bluetooth must be paired first from mobile POS to another device or PC. See Connected devices → Bluetooth on this user manual.
•
Tap Hotspot and tethering.
•
To enable
, tap Bluetooth tethering.
Ethernet
Note:
To connect the mobile POS to Ethernet, it will need an Elo I/O hub (E863687). When available, the mobile POS will automatically prioritize the ethernet
connection. If does not, please follow the steps below:
•
Place the mobile POS into the Elo hub.
•
Set Wi-Fi to disable.
Go to Wi-Fi settings, tap Use Wi-Fi to disable
•
Tap Ethernet.
•
Tap toggle switch to enable
User Manual – Elo M60 Pay Mobile POS M60 / M60C / M60S / M60SC
.
.
.
.
UM600609 Rev C page 43 of 115
Advertisement
Table of Contents
