Table of Contents
Advertisement
Section 2: Getting Started
Unpacking and Initial Inspection
The M60 Pay mobile POS fulfils PCI-PTS security requirements. Upon receipt of your device, the following inspection should be performed.
•
Check if any damage on the shipping carton.
•
Open the carton box and verify all contents listed below are included in the box:
Elo M60 Pay mobile POS.
USB-C Power Adapter.
Quick Install Guide.
•
Check if the information (product name, serial number, etc.) matches the delivery information.
•
Remove all protective material, plastic wrapping from the device, inspect the device carefully if any damage or signs of tampering
Inspect the security seals and labels to make sure no signs of peeling of tampering.
Inspect chip card acceptor to make sure that there's no untoward obstruction(s) or suspicious objects at the opening.
Inspect MSR slot to make sure that three is no other additional reader or inserted object(s).
Inspect appearance of device to make sure that there is no tamper evidence. It is important to review especially in the touchscreen area.
Power on the device, check if any tamper warning message shown on the screen and make sure the red LED in the front is not turned on.
Inspect the HW/FW version and check if it runs well.
Note:
Keep the packing material and shipping carton, which must be re-used whenever the device is shipped.
Do not use a device that has been damaged or tampered with. The M60 Pay mobile POS comes equipped with tamper-evident
label(s). If any of the label or components appears damaged, please notify the shipping company and your Elo representatives or service
provider immediately.
User Manual – Elo M60 Pay Mobile POS M60 / M60C / M60S / M60SC
UM600609 Rev C page 19 of 115
Advertisement
Table of Contents
