Service Interval And Dguv Display - Miele PW 6241 Operating And Installation Instructions

Service interval and DGUV display

If the following message appears in the machine display after "Mains
on", either a service or the annual DGUV check must be carried out.
Service interval

Call the Service Department.
DGUV test

Call the Service Department.
The display will go out after 5 seconds
 Repairs to electrical or steam heated machines must only be
undertaken by a suitably qualified service technician to ensure
safety. Unauthorised or incorrect repairs could cause personal
injury or damage to the appliance.
Malfunctions occurring before or after the start of a programme will

be shown in the display.
The display remains dark. There is no power to the machine.
Check the plug, main switch and (on-site) fuses.

Power cut

Programme stopped.
Press the start button.
When the power has been restored, press "START".

Useful tip: This fault message can mean: the motor thermo-switch of
the drive motor has been triggered.
Allow the motor to cool down.

Water inlet fault

Call the Service Department
if restart does not work.

Check the water tap and press the "START" button.

Problem solving guide
1




53