Miele PW 6241 Operating And Installation Instructions page 54
Commercial washing machine
Hide thumbs
Also See for PW 6241:
- Operating and installation instructions (72 pages) ,
- Operating instructions manual (46 pages) ,
- Fitting instructions manual (60 pages)
Table of Contents
Advertisement
Problem solving guide
54
Door lock fault
Call the Service Department
if restart does not work.
Press firmly against the door handle until the lock audibly engages
and press the "START" button.
Heating system fault
Programme stopped. Press start.
Programme will continue without heat.
Press the "START" button to continue the programme without
heating.
Useful tip: Disinfection programmes will be cancelled if this fault
message appears.
Call Miele Professional Service.
Drive motor fault
Programme stopped. Press start.
Motor overheating.
Allow the motor to cool down.
Imbalance fault
Call the Service Department
if restart does not work.
Too large an imbalance. The imbalance switch has been triggered.
Switch the machine off and back on again and press "START".
Drain valve fault
Call the Service Department
if restart does not work.
Check the on-site drain system and press "START".
A defective drain valve must only be repaired by Miele Professional
Service.
Dispensing system fault
Fill dispenser ??. Press the start button.
Change the dispenser container.
Advertisement
Table of Contents
