Optional modules (depending on country)
Resetting the load
display to zero
48
Weighing system/Weighing plinth
If the machine is equipped with a weighing plinth, the laundry load
weight is displayed in 0.2 kg increments during loading. The
maximum load weight for the selected programme is displayed
beside it.
Do not place items on the machine. Do not lean against the
machine.
This can influence the result of the measurement.
If the load display is not set to "
indicator to 0 by pressing the button.
Cottons hygiene
1
60 °C
Main wash
Rinses
+
If after resetting to 0 (taring), you remove an overlooked item from
the drum, the following will appear in the display:
1
Cottons hygiene
60 °C
Main wash
Rinses
+
Reset the display to 0 using the button.
Useful tip: If the machine is overloaded, for example when laundry is
wet, it will operate in accordance with the nominal load after the
programme starts. This value is also saved in the operating data
module.
At the end of the programme when the drum has stopped rotating,
the residual moisture in the laundry is shown in the display.
Whites
1
Programme
end
The door can be opened
0.0
" when the drum is empty, set the
00,0 / 16,0 kg
->I<-
--,- / 16,0 kg
->I<-
Residual
60 %
moisture