Frequently asked questions
52
Service interval and DGUV display
If the following message appears in the machine display after "Power
on", either a service or the annual DGUV check must be carried out.
Maintenance interval
Call Technical Service.
DGUV test
Call Technical Service.
The display will go out after 5 seconds.
Repairs to electrical or steam-heated machines must only be
undertaken by a suitably qualified specialist. Incorrect repairs can
cause considerable danger to users.
Malfunctions occurring before or after the start of a program will be
shown in the display.
The display remains dark. There is no power to the washing machine.
Check the electrical plugs, power switch, and (on-site) fuses.
Power failure
Program stop.
Press Start.
Once the power has been restored, press the "START" button.
Tip: This error message can mean: The winding protection of the
drive motor has been triggered.
Allow the motor to cool down.
Water intake fault
Call Technical Service
if restart w/o success.
Check the faucet and press the "START" button.
1