Xkm Rs232 Communication Module; Plinth; Weighing Plinth; Vapour And Foam Venting Kit (Bws) - Miele PW 811 Installations Plan

Installation and planning notes
XKM RS232
communication
module

Plinth

Weighing plinth

Vapour and foam
venting kit (BWS)
18
The serial interface RS232 can be retrofitted to the washing machine
via an XKM RS232 communication module (optional accessory
available from Miele). This communication module must only be used
with Miele Professional machines that are fitted with an appropriate
slot for the module.
The data interface provided via communication module
XKM RS232 complies with SELV (Safety Extra Low Voltage) in
accordance with EN 60950.
Appliances connected to this interface must also be SELV
compliant.
Communication module XKM RS232 is supplied with a connection
cable and a D-sub-connector.
The machine can be installed on a plinth (open or box plinth, available
as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working
position when loading or unloading. It also simplifies the installation
of a waste water connection.
 The washing machine must be secured to the plinth
immediately after installation. The plinth must be secured to the
floor.
There is a risk of the washing machine falling off a raised plinth
during a spin cycle if it is not secured.
The washing machine is optionally available with a weighing plinth. In
this version, the actual weight of the laundry load is displayed in
0.2 kg increments during loading along with the maximum laundry
load weight for the unit.
Make sure that the washing machine is not in contact with objects
or people located nearby or leaning against it. They could be
weighed as well and falsify the load weight shown in the display.
If excessive suds form, foam may escape from the vapour vent. To
remove the foam, an optional vapour and foam venting kit (BWS) can
be used.
PW 811 / PW 814 / PW 818