Optional Accessories; Bsk = Payment System Kit - Miele PW 6321 EL Installations Plan

Commercial washing machine
Hide thumbs Also See for PW 6321 EL:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
BSK = Payment
system kit
These connectors are sealed and need to be drilled open using a
8 mm drill bit before connecting.
Make sure that you only drill through the first panel (I) as there is a
deflecting panel (II) 10 mm behind it.
Connections 3 to 12 are provided for liquid detergent. High pressure
dispensing systems with water injection must not be connected to
these connections. The connectors are sealed and must be cut to the
diameter of the hose with a small saw before they are connected.
If opened connectors are no longer required, they must be resealed
using a suitable sealant (e.g. silicone).
Connection terminals for five time-controlled dispenser pumps, which
can be operated without a multifunction module, are located behind
the cover adjacent to the electrical connection.
Calibration of the dispenser pumps and regulation of dispensing
quantities is carried out partly automatically for washing machines
fitted with an optional multifunction module. Information regarding
settings is given in the operating instructions.
A flowmeter or flow sensors can also be connected for monitoring the
dispensing quantity precisely.
Connections for level monitoring are available for every agent dis-
pensed.

Optional accessories

Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the warranty, and Miele cannot accept liability.
The washing machine can be equipped with a payment system (e.g.
for self-service operations) using the optional BSK payment system
kit. This must be connected and programmed by a Miele Service tech-
nician. Payment systems with mechanical or electronic coin validator
are available from Miele as optional accessories for individual target
groups.
The programming required for connecting a payment system must be
carried out by Miele Service or an authorised Miele dealer only. A
separate electrical connection is not required for a payment system.
en - Installation notes
9

Advertisement

Table of Contents
loading

Table of Contents