Pairing The Headset With Other Bluetooth Devices; Phone Pairing; Initially Pairing The Acs-Ram - Sena ACS-RAM User Manual

4. PAIRING THE HEADSET WITH
OTHER BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be "paired." This enables them to recognize and
communicate with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone, GPS, MP3 player, or Sena SR10 Two-Way Radio Adapter via
Mobile Phone Pairing, Second Mobile Phone Pairing and GPS Pairing.
The headset can also be paired with up to three other Sena headsets.

4.1 Phone Pairing

There are three ways to pair the phone.

4.1.1 Initially Pairing the ACS-RAM

The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
1. Press and hold the Center Button and the (+) Button for 1 second.
=
2. Select ACS-RAM in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
Blinking
HOLD
1s
ACS - RAM
ACS-RAM Motorcycle Bluetooth
" Phone pairing"
Bluetooth
Pi
Device B
Communication System | 13
®