Pairing The 10C With Bluetooth Devices; Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device - Sena 10C User Manual

6 PAIRING THE 10C WITH BLUETOOTH
DEVICES
Before using the 10C Bluetooth headset with any other Bluetooth
devices for the first time, you will need to pair them together. You can
pair the 10C with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3 players, or motorcycle specific Bluetooth GPS navigation,
and with other Sena Bluetooth headsets. The pairing operation is
required only once for each Bluetooth device. The headset remains
paired with the devices and automatically reconnects to them when
they are within range. You will hear a high toned single beep and a
voice prompt whenever the headset reconnects to the paired device:
"Phone connected" to a mobile phone, "Media connected" to a
Bluetooth stereo device.
6.1 Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device
Follow the procedure below to pair a mobile phone or a Bluetooth
stereo device such as an MP3 player with your 10C.
1. Turn on the 10C and press and hold the Phone Button for
5 seconds until the LED flashes red and blue alternately and
you hear multiple beeps. You will hear a voice prompt, "Phone
pairing".
2. Search for Bluetooth devices on your mobile phone. Select the
Sena 10C in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
4. The mobile phone confirms that pairing has been completed
and the 10C is ready to use. You will hear a voice prompt, "Your
headset is paired".
5. If the pairing process is not completed within three minutes, the
10C will return to stand-by mode.
10C
23