Downloadable Sena Software Download the SENA MOTORCYCLES App at Google Play Store Store. SENA MOTORCYCLES Download the following items at sena.com. Firmware Sena Device Manager • Firmware upgrade • Device configuration setting Quick Start Guide, User’s Guide Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.
Product Details Mesh Intercom Antenna Jog Dial Mesh Intercom Button Phone Button Status LED Charging LED DC Power Charging & Firmware Upgrade Port Speaker and Microphone Port...
Icon Legend Press and Hold button/Jog button/Jog Dial the HOLD Dial for the specified amount specified number of times of time Rotate Jog Dial clockwise (right) or ROTATE ROTATE ROTATE counterclockwise (left). Rotate while Pressing Jog Dial clockwise (right) or ROTATE ROTATE ROTATE...
When you initially turn on the headset: Blinking HOLD ① “Phone Pairing” ② Select SPIDER ST1 in the list of Bluetooth devices detected. Bluetooth SPIDER ST1 Device B • For more information on phone pairing, refer to the User’s Guide.
Using the Phone Answer a Call End a Call Reject a Call Voice Dial HOLD stand-by mode Music Control Play/Pause HOLD Track Forward Track Backward ROTATE ROTATE...
Page 10
Open Mesh, Channel 1” Mesh Intercom Off “ Mesh intercom off” Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.
Page 11
① Enter into the Channel Setting. “ Channel setting, 1” ② Navigate between channels. ••• Exit •••) ROTATE “ #” ROTATE ③ Save the channel. “ Channel is set, channel #” Note: You can use the SENA MOTORCYCLES App to change the channel.
Page 12
Group Mesh Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. 1) Creating a Group Mesh Creating a Group Mesh requires two or more Open Mesh users.
Page 13
2) Joining an Existing Group Mesh One of the current users in an Existing Group Mesh can allow users (one or more) in Open Mesh to join the Existing Group Mesh. Existing Group Mesh Open Mesh Existing Group Mesh ① One (You) of the current users in the Existing Group Mesh and new users (D and F)
Page 14
Enable/Disable Mic (Default: Enable) Users can enable/disable the microphone when communicating in a Mesh Intercom. HOLD Reset Mesh If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1). HOLD...
Troubleshooting Factory Reset HOLD ① “ Factory Reset” “ Headset reset, ② good-bye” Fault Reset Note: Fault Reset will not restore the headset to the factory default settings.
Quick Reference TYPE OPERATION BUTTON COMMANDS HOLD Power on / Power off Basic Operations ROTATE ROTATE Volume up / Volume down Answer phone call End phone call Mobile HOLD Reject phone call Phone Voice Dial HOLD Play/Pause music ROTATE Track forward Music ROTATE Track backward...
Page 18
TYPE OPERATION BUTTON COMMANDS Mesh Intercom on/off Channel setting HOLD Mesh Grouping Mesh Intercom™ HOLD Reset Mesh HOLD Enable/Disable Mic 1.1.0_EN_May2021...
Need help?
Do you have a question about the SPIDER ST1 and is the answer not in the manual?
Questions and answers