Table of Contents
Advertisement
10 CONFIGURATION SETTING
10.2 Software Configuration Setting
You can change the settings of the headset through the SENA
MOTORCYCLES App or the Sena Device Manager.
SENA MOTORCYCLES
10.2.1 Headset Language
You can select the device language. The selected language is
maintained even when the headset is rebooted.
10.2.2 Audio Equalizer (Default: Off)
Increase or decrease the decibel level of different frequency ranges of
audio.
• Balance will adjust all of the frequency ranges to be the same volume
level (0 dB).
• Bass Boost will increase the bass range of audio (20 Hz-250 Hz).
• Mid Boost will increase the mid range of audio (250 Hz-4 kHz).
• Treble Boost will increase the high range of audio (4 kHz-20 kHz).
10.2.3 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as "Hello" loudly or by blowing air into the
microphone. VOX Phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Center
Button to answer an incoming call.
10.2.4 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality.
Note: The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
ACS-RAM Motorcycle Bluetooth
Sena Device Manager
Communication System | 23
®
Advertisement
Table of Contents
