Table of Contents
Advertisement
10U
5 PAIRING THE 10U WITH BLUETOOTH DEVICES
Before using the 10U Bluetooth headset with any other Bluetooth
pair the 10U with Bluetooth mobile phones, Bluetooth stereo devices
and with other Sena Bluetooth headsets. The pairing operation is
paired with the devices and automatically reconnects to them when
they are within range. You will hear a high toned single beep and a
voice prompt whenever the headset reconnects to the paired device
: "Phone connected" to a mobile phone, "Media connected" to a
Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device
Follow the procedure below to pair a mobile phone or a Bluetooth stereo
device such as an MP3 player with your 10U.
1. Press and hold the Joystick for 5 seconds until you hear a voice
prompt, "Phone pairing".
2. Search for Bluetooth devices on your mobile phone. Select the Sena
10U in the list of the devices detected on the mobile phone.
24
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
10U is ready to use. You will hear a voice prompt, "Your headset is
paired".
5. If the pairing process is not completed within three minutes, the 10U
will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is
disconnected, tap the Rear Button to recover the Bluetooth connection
immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the Joystick for 1 second to recover the Bluetooth
connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone,
GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-
but second mobile phone pairing allows the headset to connect with two
HFP devices simultaneously. So, when you already have a mobile phone
connected with the 10U, you can also pair and connect a second mobile
phone or other HFP devices.
Hide quick links:
Advertisement
Table of Contents
