3.8 Muting the Microphone (Default: Unmute)
To mute the microphone, tap the Center Button and the (-) Button
until you hear a voice prompt, "Mic off".
To unmute the microphone, tap the Center Button and the (-) Button
until you hear a voice prompt, "Mic on".
Note:
1. The mute and unmute function only works if Bluetooth Intercom or Mesh
Intercom is on.
2. After turn off your headset, the Mute setting will return to default
(Unmute).
4 PAIRING THE HEADSET WITH BLUETOOTH
DEVICES
You can pair the headset with Bluetooth mobile phones. The pairing
operation is required only once for each Bluetooth device. The headset
can also be paired with up to three other Sena headsets.
4.1 Mobile Phone Pairing - Mobile Phone
1. Press and hold the (+) Button and Center Button for 10 seconds
when the Tufftalk M is turned off.
2. You will hear a voice prompt, "Phone pairing".
3. Search for Bluetooth devices on your mobile phone. Select the
Sena Tufftalk M in the list of the devices detected on the mobile
phone.
4. If your mobile phone asks for a PIN, enter 0000.
Tufftalk M
11