Table of Contents
Advertisement
MAINTENANCE & TROUBLESHOOTING
Maintenance & Troubleshooting
This section contains maintenance and troubleshooting information for your v40 laser.
•
Maintenance – describes typical v40 maintenance procedures.
•
Troubleshooting – explains how to troubleshoot common v40 problems
A risk of exposure to toxic elements may result when certain optical or beam delivery components
are damaged. In the event of damage to laser or marking head optics, contact NOVANTA, Inc. or the
optics manufacturer for handling instructions.
Maintenance
This section includes the following subsections:
•
Disabling the v40 laser
•
Daily inspections
•
Storage/shipping
•
Cleaning optical components
Disabling the v40 laser
Before performing any maintenance on your v40 laser, be sure to completely disable the laser by
disconnecting the DC Power from the rear panel of the laser.
Daily inspections
Perform the following steps daily to keep your v40 laser in optimum operating condition. Except for the
procedures described below, no other service is required or should be attempted.
If you operate the laser in dirty or dusty environments, contact NOVANTA about the risks of doing so
and precautions you can take to increase the longevity for the laser system and associated optical
components.
Caution: Possible Equipment Damage
Caution: Possible Equipment Damage
PAGE
|
78
Advertisement
Table of Contents
Troubleshooting
