Novanta v40 User Manual page 37

EUROPEAN UNION (EU) REQUIREMENTS ROHS COMPLIANCE
Over Temperature
Protection
Temp Indicator
Warning Labels
1 Not available on v40 OEM lasers
When integrating NOVANTA v40 OEM lasers, the Buyer and/or integrator of the end system is
responsible for meeting all applicable Standards to obtain the CE mark. To aid this compliance process,
NOVANTA testing program has demonstrated that v40 lasers comply with the relevant requirements of
Directive 2014/30/EU, the Electromagnetic Compatibility Directive, as summarized in Table 2 below.
Applicable Standards/ Norms
2014/30/EU
2014/35/EU
2015/863/EU
EN 61010-1:2010
EN 61000-6-4
EN 61000-6-4
EN 61000-6-2
EN 61000-6-2
EN 61000-6-2
EN 61000-6-2
After a laser or laser processing system has met the requirements of all applicable EU Directives, the
product can bear the official compliance mark of the European Union as a Declaration of Conformity.
occurs if temperature of
Circuit Element
Rear panel indicator
(Green/Red).
Laser exterior
Labels attached to
various external housing
locations.
Table 2-2 European Union Directives.
Electromagnetic Compatibility Directive
Low Voltage Directive
RoHS Directive
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1:
General Requirements
Radiated Emissions Group 1, Class A
Conducted Emissions Group 1, Class A
Electrostatic Discharge Immunity
RF Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Conducted RF Disturbances Immunity
Temperature shutdown
the laser tube rises
above safe operating
limits
Illuminates green when
laser temperature is
within operating limits,
changing to red when
thermal limits are
exceeded.
Warnings to personnel
of potential laser
hazards.
No No
No No
Yes Yes
PAGE | 37
Yes
Yes
Yes