USER I/O CONNECTIONS
it has merged with. For subtle marking applications on sensitive, low threshold materials this lengthened
PWM pulse may affect mark quality.
While this situation can occur when using PWM Command signal frequencies of 5 kHz and less, it is im-
portant to note that it isn't the Command signal frequency itself that is the determining factor but rather
this behavior happens only when the off time between PWM pulses exceeds 200 microseconds.
User I/O connections
The User I/O connections section includes subsections:
•
User I/O connection summary
•
Input/output signals
•
Sample I/O circuits
User I/O connection summary
Table below provides a quick reference summary for v40 User I/O connections.
Table 4-3 User I/O pin descriptions
PAGE
|
55