DB-9 CONNECTIONS (SAB MODELS ONLY)
DB-9 connections (SAB models only)
The side-mounted DB-9 connector on SAB model lasers provides a Shutter Switch input as well as auxil-
iary +5 and +24 VDC power. Figure below illustrates DB-9 pinouts.
+5 VDC (Pin 9) and +24 VDC (Pin 4 and Pin 5) voltage outputs are not fused or electrically protected.
Do not short these pins; the control board will be damaged.
Figure 4-16 output driving PLC input module
Caution: Possible Equipment Damage
PAGE
|
67