Table of Contents
Advertisement
Figure 43: Panel Mounting
6.3
Electrical Connections
Electrical Shock Hazard – All input and output wiring should
be installed in such a manner that access to bare copper is
prohibited during normal operation.
Avertissement de choc électrique- Tout le filage devra être
installé de manière à éviter que toute partie de fil soit dénudé
(sur le cuivre) durant l'utilisation normale
Access holes sized for ½" NPT (15 mm) and ¾" NPT (20 mm) electrical conduit fittings are
provided on the bottom of the enclosure. Sealing type conduit fittings are required to maintain
the enclosure's rating.
SPD 5.5.15
Sentry Equipment Corp | Sample Sequencer
AVERTISSEMENT
5
43
Advertisement
Table of Contents
