Setting The Mode; Editing The Sample Names; Editing Analyzer Names - Sentry Sample Sequencer 5 Installation, Operation And Maintenance Manual

Sentry Equipment Corp | Sample Sequencer
sample line you would like to update will take you to an Enter Time screen. Enter the
time desired. When finished, touch the enter button in the lower right corner. This will
bring you back to the times screen and the time you just entered will be updated. Do this
for each time you would like to update. Save changes by touching the save button in the
lower right hand corner of the screen. To exit without saving changes, touch the escape
button in the lower left hand corner.
3.8

Setting the Mode

Navigate to the first Widgets Screen. Touch the Mode widget to access the Mode
Screen (see Figure 13). Touch an indicator to toggle the sequence between the two
modes, Batch or Continuous. Make desired changes. Save changes by touching the
save button in the lower right hand corner. To exit without saving changes, touch the
escape button in the lower left hand corner.
3.9

Editing the Sample Names

Navigate to the first Widgets Screen. Touch the Sample Names widget to access the
Sample Names Screen (see Figure 30). Touch the sample name you would like to
change to bring up the Sample Names Keypad Screen. When finished, touch the enter
button in the lower right corner. This will update the Sample Names Screen with the
name you just entered. Make any additional name changes. Save changes by touching
the save button in the lower right hand corner. To exit without saving changes, touch the
escape button in the lower left hand corner.
3.10

Editing Analyzer Names

Navigate to the first Widgets Screen. Touch the Analyzer Names widget to access the
Analyzer Names Screen (see Figure 31). Touch the analyzer name you would like to
change to bring up the Analyze Names Keypad Screen (see Figure 32). When finished,
touch the enter button in the lower right corner. This will update the Analyzer Names
Screen with the name you just entered. Make any additional name changes. Save
changes by touching the save button in the lower right hand corner. To exit without
saving changes, touch the escape button in the lower left hand corner.
6

5
SPD 5.5.15