Sentry Sample Sequencer 5 Installation, Operation And Maintenance Manual page 3

Sentry Equipment Corp. declares under our sole responsibility that our Sample Sequencer 5 to
which this declaration relates is in conformity with the following standards:
Product Safety:
Certified to CAN/CSA C22.2 No. 1010.1-92 (Certificate # XXXXXXX)
Low Voltage Directive 2006/95/EC
Required Standards include:
EN 61010-1:2001/IEC 61010-1:2001
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 1: General requirements
Electromagnetic Compatibility:
EMC Directive 2004/108/EC:
Required Standards include:
EN 61326-1:2006 / IEC 61326:1997 w\A1:1998 & A2:2001
Electrical equipment for measurement, control, and laboratory use EMC requirements - Part 1:
General requirements
Immunity:
Emissions:
FCC Compliance:
FCC Part 15.107 & 15.109
Canadian Compliance:
ICES 003
RoHS Compliance:
Directive 2002/95/EC
This product complies with the RoHS Directive.
Type of Equipment: Electrical Equipment for Measurement, Control, and Laboratory Use
Part Number: 7-02690F
Year CE Mark Affixed to Product: 2011
SPD 5.5.15
Declaration of Conformity
Required tests include:
IEC 61000-4-2 ESD
IEC 61000-4-3 Radiated Susceptibility
IEC 61000-4-4 EFT
IEC 61000-4-5 Surges
IEC 61000-4-6 RF Cond.
IEC 61000-4-8 Magnetic Susceptibility
IEC 61000-4-11 Volt dips, interrupts
Required tests include:
EN 55011 Class A limits
EN 61000-3-2 Harmonic
EN 61000-3-3 Voltage Fluctuation (Flicker)
Sentry Equipment Corp | Sample Sequencer

5
i