Table of Contents
Advertisement
6 INSTALLATION
This instrument should be installed by qualified technical
personnel to ensure adherence to all applicable electrical
codes.
Cet instrument doit être installé par un technicien certifié afin
d'assurer que toutes les normes au code électrique sont
respectées.
To ensure the protection provided by this equipment is not
impaired, this equipment must not be installed or used in any
manner other than that which is specified in this manual.
Afin de s'assurer que la protection prévue par cette pièce
d'équipement n'est pas défaillante, cet équipement ne doit
pas être installé ou utilisé de manière autre que spécifié dans
le manuel.
6.1
Unpacking
After carefully removing the Sample Sequencer from its shipping carton, inspect it for any damage.
Report damages to the shipper at once.
6.2
Mounting
It is recommended the Sample Sequencer be mounted close to the analyzer to permit viewing of
both devices at the same time. This allows the operator to control the Sample Sequencer while
viewing the analyzer.
The Sample Sequencer can mount easily to a panel or wall. All mounting methods must be
capable of supporting at least 24 pounds (10.9 kg).
SPD 5.5.15
Sentry Equipment Corp | Sample Sequencer
AVERTISSEMENT
AVERTISSEMENT
5
39
Advertisement
Table of Contents
