Table of Contents
Advertisement
Sentry Equipment Corp | Sample Sequencer
5
press the save button to update the time. Touching the escape button will return to the previous
screen without saving.
5.2.12
Communications
The Sample Sequencer has the capability to communicate via Modbus TCP/IP or embedded
web using the 10base-T Ethernet port. To set up these options, enter the correct IP, Subnet,
and Gateway values. If using Modbus, set desired address.
Figure 17: Communications Screen
5.2.13
IO
Use the IO widget to view and update input and output settings for the Sample Sequencer.
Analog and digital inputs and outputs can be viewed, tested, and calibrated from this screen.
Also, the analog input scale can be set, the solenoid valve outputs can be tested, and the touch
screen can be calibrated.
Figure 18: I/O Screen
Select the IO function you would like to perform by touching the black button to the right of the
description.
SPD 5.5.15
23
Advertisement
Table of Contents
