Sentry Sample Sequencer 5 Installation, Operation And Maintenance Manual page 27


Sentry Equipment Corp | Sample Sequencer 5
Figure 13: Mode Screen
Touch the indicator next to the analyzer to be changed. Touching the indicator toggles the
analyzer between Continuous and Batch modes. Press the save button to save the changes
made on this screen. To return to the previous screen without saving, press the escape button.
5.2.9 Sequences Active
The Sample Sequencer is capable of sequencing up to four different analyzers. Select the
number of analyzers to be sequenced on the Sample Sequencer.
Figure 14: Sequences Active Screen
Touch the number of sequences active using this screen. Press the save button to save the
changes made on this screen. To return to the previous screen without saving, press the
escape button.
SPD 5.5.15 21