Sentry Sample Sequencer 5 Installation, Operation And Maintenance Manual page 35

4. Repeat for any other scale values you would like to adjust.
5. When the indicator is illuminated, the solenoid valve output is on.
6. When finished, touch the save button to save all scale values, or touch the escape button
to return to the previous screen without saving.
5.2.22 IO – Touchscreen Cal
To calibrate the touchscreen, use the Touchscreen - Cal Screen.
Figure 27: Touchscreen - Cal Screen
Use this screen when you wish to recalibrate the touchscreen. This screen also displays each
time the unit is powered up.
Follow the prompts on the screen to perform the touchscreen calibration. For better results, it is
recommended to use a stylus for this calibration.
This calibration is timed; failure to follow the prompts in a timely manner will return you to the
main screen without saving the calibration values. The screen will indicate the calibration is
complete if the prompts were followed correctly.
SPD 5.5.15
Sentry Equipment Corp | Sample Sequencer

5
29