ADC HiGain H2TU-C-388 List 1E User Manual page 50

Monitoring System Activity and Performance
Any DS1 Alarm History reset
Any DS1 PM register reset
Any HDSL2 Alarm History reset
Any HDSL2 PM register reset
Any Loop Down (any segment)
Any Loop Up (any segment)
Any provisioning option change: <provisioning mnemonic>: changed from
<old> to <new>
CPE DBER alarm (1 day threshold crossed of any PM data except PRM-NE or
PRM-FE)
CPE DS1 AIS begins / ends
CPE DS1 LOS begins / ends
CPE PRM-NE BER alarm (at the remote only: 1 day threshold crossed of
PRM-NE: trouble on CPE receive)
Current statistics reset
Event Log reset
H2TU-R Power up / down
HDSL2 DC pair open begins/ends on any segment
HDSL2 Ground fault begins/ends on any segment
HDSL2 HBER alarm (threshold crossed) on any segment.
HDSL2 loop attenuation (threshold crossed) on any HDSL2 I/F
HDSL2 margin alarm (threshold crossed) on any HDSL2 I/F
HDSL2 unavailability begins / ends on any segment
Master zero reset
NTWK DBER alarm (1day threshold crossed of any PM data)
NTWK DS1 LOS begins / ends
NTWK PRM-FE BER alarm (at the remote only: 1 day threshold crossed of
PRM-FE: trouble on NTWK far end)
NTWN DS1 AIS begins / ends
Power Feed Open begins / ends
Power Feed Short begins / ends
RAI begins / ends
TX-RAI-CI begins / ends (RAI-CI sent from the remote towards the network)
42
Table 19. Event Log Entry Messages
Event Log Messages
April 21, 2000
152-388-115-03, Issue 03
H2TU-C-388 List 1E