Provisioning; Using The Mode And Sel Buttons; Setting Options Through Mode And Sel - ADC HiGain H2TU-C-388 List 1E User Manual

152-388-115-03, Issue 03
P
ROVISIONING
There are two provisioning methods:
• Use the MODE and SEL buttons on the front panel of the H2TU-C to:
– Set system options
– Reset the H2TU-C to its factory default settings for system options
– Display system option settings or scroll mode
– Select system loopbacks
• Use a maintenance terminal, such as ASCII terminal or a PC running terminal emulation software, connected
to the H2TU-C craft port or to an HMU craft port to access the HiGain HDSL2 maintenance screens. The
maintenance screen, shown in
inventory, and provisioning screens.
No dip switches or jumpers are required to provision the H2TU-C-388 as it contains a
non-volatile RAM (NVRAM) which stores the system option settings. System option settings are
retained if shelf power is lost or if the H2TU-C-388 is unplugged.
U MODE
SING THE

Setting Options through MODE and SEL

To provision the H2TU-C-388 through the MODE and SEL buttons on the front panel:
1 Press the MODE button for 1 second and then release it. The front panel display alternately shows the first
system parameter and its current setting.
2 Press the SEL button to step through all possible settings of the selected parameter.
3 After the desired setting has been selected, press the MODE button. This updates the current displayed
parameter to the selected setting, then advances to the next configurable parameter. After the last parameter
has been selected, a CONF NO message appears on the front-panel display.
4 Do one of the following:
•
To cancel the session without saving the requested parameter changes, press the MODE button or do
nothing. After 30 seconds, the display returns to its normal mode without saving the new changes.
• To accept the requested parameter changes, press the SEL button. A CONF YES message displays, and
the display returns to its normal mode after saving the new changes.
H2TU-C-388 List 1E
Figure 4 on page 14, provides full access to all H2TU-C status, history,
SEL B
AND UTTONS
April 21, 2000

Provisioning

11