Making Changes To The System Configuration; Configuration Menu - ADC HiGain H2TU-C-388 List 1E User Manual

152-388-115-03, Issue 03

Making Changes to the System Configuration

The Config menu, shown in
changes:
• Standard options, as described in
•
PairGain options, as described in
•
Date and time, as described in
•
Master Clear, as described in
•
Reset to factory default configuration, as described in
Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
Making Changes to Standard and PairGain Options
Figure 8 and Figure 9 on page 18
those that are supported by HiGain HDSL2 units when connected to units from other vendors. PairGain options
are an extended set of options that are only available when using HiGain units exclusively. For a description of
each option and a list of possible option settings, refer to
changes to these options:
1 Press C to select the Config menu.
2 Use the ↑ and ↓
3 Use the arrow keys to select an option.
4 Press the SPACEBAR
5 Press ENTER to activate your choice.
H2TU-C-388 List 1E
Figure 7 below, allows you to make the following types of system configuration
"Making Changes to the System Configuration" on page 17
"Making Changes to the System Configuration" on page 17
"Setting Date and Time" on page 15
"Clearing the History, Alarm, and Event Log Screens" on page 28
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
04/21/00 12:30:01
Figure 7. Configuration Menu
show the Standard and PairGain configuration options. Standard options are
arrow keys to select Standard Options or PairGain Options, and press
to cycle through the settings for that option.
April 21, 2000
Figure 10 on page 27
Inventory Rlogon Help
|
|
-> |
|
H2TU-C
Table 5 on page 19 and Table 6 on page
Provisioning
System: OK
20. To make
ENTER .
17