Configure The Samba Service - Zte ZXHN H3601 Maintenance Management Manual

Parameter
Media Source1–
Media Source4
By default, the media source is /mnt, that is the root directory of the USB device. You
can change the root directory to other directory of the USB storage device.
3. Click Apply button to apply the changes.

6.8 Configure the Samba Service

The procedure provides the parameters of samba configuration features.
Steps
1. On the main page of the ZXHN H3601, select Local Network > Samba Service to
open the Samba Service page, see
Figure 6-27 Samba Service
Table 6-19
Table 6-19 Samba Service parameters
Parameter
Samba Service
Host Name
Anonymous
Samba Username/Samba
Password
SJ-20200429083356-004 | 2020-07-23(R1.0)
Description
By default, the media source is /mnt, that is the root directory of the USB
device. You can change the root directory to other directory of the USB
storage device.
Note
lists the samba service parameters.
Figure 6-27.
Description
Click On to enable the samba service function manually.
Click Off to disable the samba service function.
Click Auto On After Detecting USB Storage Plugged: If
detecting USB Storage Plugged, it will enable the samba
service function automatically.
The name of samba host.
Click On to enable the anonymous function.
Click Off to disable the anonymous function.
It is valid only if Anonymous is disabled.
6 Configure the Local Network
6-23