Zte ZXHN H3601 Maintenance Management Manual page 38

ZXHN H3601 Maintenance Management Guide
Parameter
Name
Target
Ingress
Prefix
Service Type
3. Click Apply button to apply the changes.
Remote Service Port Control-IPv4
1. Click Remote Service Port Control - IPv4 to open Remote Service Port Control -
IPv4 page, see
Figure 5-18 Remote Service Port Control - IPv4 Page
2. Configure the remote service port control - IPv4 parameters.
Table 5-12
Table 5-12 Parameter Descriptions for the Remote Service Port Control - IPv4
Parameter
HTTP
FTP
TELNET
HTTPS
5-18
Description
Click Off to disable the function.
Name of the Service Control item.
The name must be specified.
Specify to discard or permit the data packages.
Specify the data stream inbound direction, and this parameter must
be specified.
If the Ingress is WAN_All, all the WAN connection can access

ZXHN H3601.
If the Ingress is LAN, the LAN side can access ZXHN H3601.

IPv6 address prefix.
Type Specify the service that is permitted or denied to access.
Figure 5-18.
lists the remote service port control - IPv4 parameters.
Description
The remote service port control of HTTP.
The remote service port control of FTP.
The remote service port control of TELNET.
The remote service port control of HTTPS.
SJ-20200429083356-004 | 2020-07-23(R1.0)