Zte ZXHN H3601 Maintenance Management Manual page 59

Parameter
Prefix Delegate Type
3. Click Apply button to apply the changes.
Configure the RA service.
1. Click RA Service to open the RA Service page, see
Figure 6-15 RA Service Page
2. Configure the
parameters.
Table 6-11 Description of the RA Service Parameters
Parameter
RA Service
Specify MTU
Preference
MTU
Minimum Retry Interval/
Maximum Retry Interval
M, O
SJ-20200429083356-004 | 2020-07-23(R1.0)
Description
Option:
AutoSense: One prefix selected automatically from all the

available prefixes will be delegated.
Manual: One or more prefixes selected manually from all the

static prefixes configured before will be delegated.
Disabled: No prefix will be delegated.

RA service parameters.
Description
Select On to enable the RA service.
Select Off to disable the RA service.
If On button is selected, enter the MTU value.
By default, the preference is Middle.
Define the maximum transfer unit.
The minimum/maximum time allowed between two unsolicited
multicast router advertisements sent from the interface.
M: managed address configuration.
6 Configure the Local Network
Figure
Table 6-11 describes the RA service
6-15.
6-13