Features And Controls - Perkins 403EA-11 Operation And Maintenance Manual

M0132847

Features and Controls

Monitoring System
(Engine Warning Indicators)
Table 6
Shutdown
Warning Indicator
Indicator
ON ON
OFF OFF
Sensors and Electrical
Components
The illustrations within the section show the typical
locations of the sensors and other electrical
components on the Industrial engine. Specific
engines may appear different due to the application.
The following sensors or switches can be installed on
the industrial engines:
• Oil pressure switch
• Coolant temperature sensor/switch
• Atmospheric pressure sensor (Barometric
pressure sensor)
• Speed sensor
• Governor actuator
Sensor Locations for the Engine
403EA-11 Engine
Note: In the following illustrations, some components
have been removed to improve visibility.
i08708034
Table for Warning Indicators
Description of the
Indicator State Indication
Indicator Check Keyswitch in the ON posi-
tion all Indicators should il-
luminate for 0.5 of a
second.
-
No Fault
i08645089
Engine Status
Power ON, Indicator
check
Engine is not
operating.
Engine operating
normally.
Note: The engine wiring harness is not shown in the
illustrations.
35
Operation Section
Features and Controls
Operator Action
If any of the Indicators will
not illuminate during the
Indicator check, the fault
must be investigated
immediately.
If any Indicator stays illu-
minated or flash, the fault
must be investigated
immediately.
None