Table of Contents
Advertisement
Use printer menus
Menu item
Outbound Traffic Maximum
Speed
Disabled*
Enabled
100–1000000 (100000*)
Enable TLSv1.0
On*
Off
Enable TLSv1.1
On*
Off
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable the printer maximum transfer rate.
Enable the TLSv1.0 protocol.
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
245
Advertisement
Table of Contents
