Table of Contents
Advertisement
Use printer menus
Menu item
Enable analog receive
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Server E‑mail Settings
Menu item
Use E‑mail SMTP Server
On
Off*
Primary SMTP Gateway
Primary SMTP Gateway Port
1–65535 (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port
1–65535 (25*)
SMTP Timeout
5–30 (30*)
Reply Address
Use SSL/TLS
Disabled*
Negotiate
Required
Require Trusted Certificate
Off
On*
SMTP Server Authentication
No authentication required*
Login / Plain
NTLM
CRAM‑MD5
Digest‑MD5
Kerberos 5
Device‑Initiated E‑mail
None*
Use Device SMTP Credentials
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to receive analog faxes.
Description
Use the Simple Mail Transfer Protocol (SMTP) settings for e‑mail in receiving
and sending faxes.
Note: When set to On, all other settings of the Fax Server E‑mail Settings
menu are not shown.
Type the IP address or host name of the primary SMTP server.
Enter the port number of the primary SMTP server.
Type the server IP address or host name of your secondary or backup SMTP
server.
Enter the server port number of your secondary or backup SMTP server.
Set the time before the printer times out if the SMTP server does not respond.
Specify a reply address for sending fax.
Specify whether to send fax using an encrypted link.
Specify a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
Specify whether credentials are required for device‑initiated e‑mail.
218
Advertisement
Table of Contents
