Initial Configuration In Windows - Huawei V100R002C01 User Manual

Tecal ES3000 High Performance PCIe SSD Card
User Guide
1
2
Configure automatic mounting.
3
4
5
6
7
----End

3.7.2 Initial Configuration in Windows

Operation Scenarios
You need to format a new ES3000 before using it.
Preparations
Before formatting an ES3000, check that:
l
l
Procedure
Step 1 Choose Start > All Programs > Administrative Tools > Server Manager.
Issue 04 (2014-03-05)
Log in to the operating system (OS) as an administrator.
Run the following command to format the SSD device (dev/hioa is an SSD device example
and ex3 is a file system example):
mkfs.ext3 /dev/hioa
NOTE
If you want to change the ES3000 capacity or delete data after mounting, run the umount /dev/hioa
command first.
Run the following command to open the fstab file:
vi /etc/fstab
Press i to get into editing mode. Add the following information to the fstab file. Then the
system automatically mounts the SSD device to /mnt after starting.
/dev/hioa /mnt auto noatime,nodiratime 0 0
Press Esc, and enter :wq.
Save and close the fstab file.
Restart the OS or run the following command to mount the SSD device:
mount /dev/hioa /mnt
Run the following command to check whether the SSD device is successfully mounted:
mount –l
If the following command output is displayed, the SSD device is successfully mounted.
/dev/hioa on /mnt type ext3 (rw)
You have installed the ES3000 driver.
You have verified the mapping between the ES3000 and the disk by using the Disk
Management in Computer Manager.
NOTE
The following information describes how to format an ES3000 in Windows 2008 R2 Enterprise Server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Configuration
40