Huawei V100R002C01 User Manual page 87

Tecal ES3000 High Performance PCIe SSD Card
User Guide
Description of the hio_info command output
Parameter
Size (GB)
Max size (GB)
Serial number
Driver version
Bridge firmware
version
Controller
firmware version
Battery firmware
version
Battery status
Run time (sec.)
Total IO read
Total IO write
Total read (MB)
Total write (MB)
IO timeout
R/W error
Max bit flip
Average EC
Max bad block rate Indicates the bad block rate for the nand flash.
Event log
Health
Issue 04 (2014-03-05)
Total read(MB):
Total write(MB):
IO timeout:
R/W error:
Max bit flip:
Average EC:
Max bad block rate:
Event status:
Health:
Description
Indicates the currently set capacity.
Indicates the maximum capacity that a user can set.
Indicates the e-label for an SSD card.
Indicates the driver version.
Indicates the bridge controller firmware version.
Indicates the controller firmware version.
Indicates the version of the supercapacitor management chip firmware.
Indicates supercapacitor status.
Indicates SSD card operating duration.
Indicates the total number of read operations.
Indicates the total number of write operations.
Indicates the total amount of read data.
Indicates the total amount of written data.
Indicates the number of I/O command timeout errors.
Indicates the number of I/O errors.
Indicates the maximum number of flipped bits in the nand flash, in bits.
Indicates the average number of data erasure times for the nand flash.
Indicates the status of SSD card log events.
Indicates the overall health status of an SSD card.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
101904289
95061798
0
0
6
303
0.049%
OK
OK
A Command Description
79