Huawei V100R002C01 User Manual page 46

Tecal ES3000 High Performance PCIe SSD Card
User Guide
l If you use the ESX 4.1 OS, run the following command to install the ES3000 driver:
l If you use the ESXi 5.0 OS, run the following command to install the ES3000 driver:
Step 3 Restart the OS.
Step 4 Run the following command to check that the device is detected:
hio_info
----End
Driver Parameters
The following information describes the ES3000 driver parameter in VMware.
The command syntax is as follows:
esxcli system module parameters set -m hio -p Parameter=Value
Table 3-3
Table 3-3 Driver parameter description
Parameter
dev_type
Issue 04 (2014-03-05)
rpm -ivh hio-2.0.0.5.x86_64.rpm
The command output is as follows:
Preparing... ########################################### [100%]
1:hio ########################################### [100%]
esxcli software vib install -v driver_package_path --no-sig-check --maintenance-mode
The following is an example:
esxcli software vib install -v /hio-2.0.0.5.vib --no-sig-check --maintenance-mode
NOTE
2.0.0.5 in the driver file name indicates the software version, and the actual version may be different.
NOTE
The new settings take effect after the ESX(i) restarts.
describes the driver parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
1
3 Installation and Configuration
Description
The options are as follows:
l 0: block mode. Registered
as a standard block
device, which uses less
system resources.
l 1: SCSI mode. Simulated
as a SCSI device, which
improves the concurrent
processing capability of
the PCIe SSD.
38