Table of Contents
Advertisement
Tecal ES3000 High Performance PCIe SSD Card
User Guide
Procedure
Step 1 Open the WinSCP folder, and double-click WinSCP.exe.
The WinSCP Login dialog box is displayed, as shown in
Figure 3-4 WinSCP login
Step 2 Set the login parameters.
The parameter descriptions are displayed as follows:
l Host name: Specifies the IP address of the device to be connected. For example:
l Port number: The default value is 22.
l User name: Specifies the username. For example: admin123
l Password: Specifies the password. For example: admin123
l Private key file: The default value is None. Do not change the default value.
l Protocol: Select the default value is SFTP, and then select Allow SCP fallback.
Step 3 Click Login.
The WinSCP file transfer page is displayed.
Issue 04 (2014-03-05)
NOTE
If the operating system (OS) is not an English system. Click Languages to set the displayed language.
191.100.34.32.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation and Configuration
Figure
3-4.
30
Advertisement
Table of Contents
