Huawei V100R002C01 User Manual page 34

Tecal ES3000 High Performance PCIe SSD Card
User Guide
Preparations
l
l
l
l
l
Procedure
Step 1 Wear ESD gloves.
Step 2 Take the new ES3000 out of the ESD bag.
Step 3 Hold the upper edge of the ES3000 with your hands, align its connecting part with the Peripheral
Component Interconnect Express (PCIe) slot, and insert the ES3000 slowly into the PCIe slot
on the riser card. See step (1) in
Step 4 Screw the ES3000 using a Phillips screwdriver. See step (2) in
Figure 3-2 Installing an ES3000 on a riser card
Issue 04 (2014-03-05)
You have stopped the running service, backed up data, logged out of the operating system
(OS), and shut down the server.
You have turned off the power to the server and removed the chassis cover.
You have obtained a riser card that can work with the server.
Unpacking and inspecting the components
Check that the components shipped are intact based on the following list:
– ES3000
– QuickStart Guide
– Warranty card
Tools
– Phillips screwdriver
Used to tighten small screws and bolts. A Phillips screwdriver has a cross on the head
to provide a small tighten torque.
– Electrostatic discharge (ESD) gloves
Used to prevent ESD damage when you insert, remove, and hold an ES3000 or hold a
precision device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-2.
3 Installation and Configuration
Figure 3-2.
26