Commands Used In Vmware; Querying General Information About Hio Devices (Hio_Info) - Huawei V100R002C01 User Manual

Tecal ES3000 High Performance PCIe SSD Card
User Guide
Syntax
HioCleareData.exe -Parameter Value
Parameter Description
Parameter
d
h
V
Example
Delete all user data on an SSD device (for example, 0).
HioCleareData.exe -d 0
The following command output is an example:
Warning: ALL DATA in the device will be CLEARED, please backup the data firstly.
Note: please make sure the device is unused.
The tool may take several minutes, please wait before completed.
Do you want to continue: yes or no? yes
Begin clean data in SSD #0, please wait a moment...
Erase SSD #0 successfully.Please reboot system.
Restart the OS.
A.3 Commands Used in VMware
This topic describes the ES3000 commands used in VMware.
After you install the ES3000 driver in VMware, common ES3000 commands are supported.
A.3.1 Querying General Information About HIO Devices (hio_info)
Function
The command is used to query general information about all HIO devices, including the capacity,
type, version, device name, and bad block.
Syntax
hio_info -Parameter Value
Issue 04 (2014-03-05)
Description
Specifies the SSD device.
Displays help information about the command.
Displays the command version.
NOTE
You can run the hio_info command in any directories.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Command Description
Value
For example,
0 or 1
None
None
93