Deleting All Data - Huawei V100R002C01 User Manual

Tecal ES3000 High Performance PCIe SSD Card
User Guide
Example
Set the ES3000 capacity.
Set parameters and click OK.
The following output is an example:
[INFO]
now on.
[INFO]
[INFO]
In the Information dialog box, click OK.
A.2.7 Deleting All Data
Function
The command is used to delete all data on an SSD device.
l The data deletion operation cannot be interrupted. If the operation is interrupted, you need
l Back up all required data before this operation. This is because all data on the ES3000 will
Issue 04 (2014-03-05)
Figure A-7 Setting the ES3000 capacity
Set capacity now.This will take a few minutes.Don't access device from
Erase SSD now. Please wait a moment.
Erase SSD completed.
NOTICE
to delete all data again. Otherwise, the SSD device cannot be properly used.
be lost after this operation. Use the command with caution.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Command Description
92