Switch Time; Time Parameters; Clock Format - Videx 4000 Series Manual

4000 Series Vandal Resistant Range
Art. 4212
Audio/video digital front panel
HOME PARAMETERS
Home par. menu
1: Line 1
2: Line 2
3: Line 3
4: Home 2

5: Switch Time

LINE 1, 2, 3
Each line can be up to 16 characters long and will appear on the
main screen in standby. Enter the string and press
a blank line enter one or more space characters.
Modify routine
• press "1", "2" or "3" to enter into edit mode;
• enter the string;
• press to save or
without saving.

TIME PARAMETERS

Time par. menu
1: Clock
2: Date
3: Trade
4: Relay Time
5: Speech Time

CLOCK FORMAT

It changes the clock format shown on the home page.
Select either 12 hour or 24 hour clock format.
Modify routine
• press "1" to enter the clock menu;
• press "1" to enter into edit mode;
• press "1" to switch from 1-12 to 0-23 and viceversa;
• press to save or to exit edit mode without saving.
Art. 4212 - Installation instructions
Parameter Name Programming method
Line 1 By panel and PC software
Line 2 By panel and PC software
Line 3 By panel and PC software
Home 2 By panel and PC software
Switch time By panel and PC software
to delete characters or exit edit mode
Parameter Name
Clock format
Clock
BST/GMT Enable/disable
Date format
Date
Day
Trade enable
Trade start
Trade end
Relay time
Speech time
HOME 2
To enable a second screen which can display a logo.
. The have
Modify routine
• press "4" button to enter into edit mode;
• press "4" to enable or disable;
• press
SWITCH TIME
Time delay when switching between the two main screens.
Modify routine
• press "5" to enter into edit mode;
• enter time is seconds: it must be between "1" and "250";
• press
without saving.
Programming method
By panel and PC software
By panel and PC software
By panel
By panel and PC software
By panel and PC software
By panel
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
CLOCK
Set the time on the door panel.
Modify routine
• press "1" to enter the clock menu;
• press "2" to enter edit mode;
• enter the hour, minutes and seconds (all fields are composed of
two digits). After entering two digits to set the hour it automat-
ically advances to the minutes and then to seconds.If in 12 hour
clock format, after seconds it is possible to select AM/PM;
• After setting the last parameter the time will be saved.
- 8 -
Programming
Permission
All
All
All
All
All
to save or to exit edit mode without saving.
to save or to delete characters or exit edit mode
Permission
All
All
All
All
All
All
All
All
All
Only Engineer
Only Engineer
Default value
/
/
/
Disabled
2 s
Default value
0-23
/
Enabled
European
/
/
Disabled
/
/
2 s
120 s
66250203 - V4.4 - 15/05/22