Code Parameters - Videx 4000 Series Manual

4000 Series Vandal Resistant Range
Art. 4212
Audio/video digital front panel

CODE PARAMETERS

Code par. menu
1: Master
2: Trade
3: Admin
4: Manage Trade Card
MASTER
The master code must to between 3 to 6 digits and must also
be different from the admin, trade and user codes. Entering the
correct master code will switch the panel in to programming
mode with engineer permissions.
Modify routine
• press "1" to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or
without saving.
TRADE
The trade code works within the trade time band and only when
TRD is shorted to 0V.
It must be between 3 to 6 digits and different to all other codes.
Entering the correct code when the above requirements are
met will open the door for the programmed time.
If the code is left blank the "Clear" button will open the door
during the active trade time.
Modify routine
• press "2" to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or
without saving.
Art. 4212 - Installation instructions
Parameter Name Programming method
Master
Trade
Admin
/
to delete characters or exit edit mode
to delete characters or exit edit mode
By panel and PC software
By panel and PC software
By panel and PC software
By panel and PC software
ADMIN
The admin code will switch the door panel in the programming
mode similar to the master code but with restricted permissions.
The code must to between 3 to 6 digits and different from all
other codes.
Modify routine
• press "3" to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or
without saving.
MANAGING TRADE CARD
Add, edit or delete proximity cards which can be used for trade
purposes only during active timeband settings.
Add routine
• press "4" to enter into edit mode;
• press "3" to add and then present a card to the reader when
asked;
• press to exit edit mode.
- 10 -
Programming
Permission Default value
Only Engineer 111111
Only Engineer 000000
Only Engineer 222222
Only Engineer /
to delete characters or exit edit mode
66250203 - V4.4 - 15/05/22