Introduction; Used Abbreviations; Related Documents - FALCOM STEPP II Getting Started

STEPP II GETTING STARTED

0 Introduction

This guide explains the basic steps for getting started with STEPP II
terminal. The STEPP II GSM/GPRS/GPS device allows a quick and
uncomplicated configuration and evaluation by the user via local RS232-
interface (directly connected to the serial port) or remotely via air interface.
With Windows
all versions of Windows 98, 98SE, Windows ME, Windows NT, Windows
2000 and Windows-XP) it is possible to request GPS position data, and to
execute a range of configurations.
The Falcom STEPP II can also be configured using the Configurator 2.0
software. The software description can be found in a separated manual, file
name is "Stepp_configurator_2.2.pdf" delivered on the CD.

0.1 Used abbreviations

Abbreviation
GPS
NMEA
GSM
GPI
CRLF
bps

0.2 Related documents

1. SiRF binary and NMEA protocol specification;
www.falcom.de/Service/Manuals/SiRF
2. SiRFDemo software and SiRFflash programming utility;
www.falcom.de/Service/Manuals/SiRF
3. stepp_II_hardware_manual.pdf
4. "Configurator 2.0" Configuration software
5. stepp_II_software_2.0RC1_manual.pdf
6. stepp_II_software_1.6.2_manual.pdf
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Hyperterminal application (utility that is pre-installed on
TM
Global Positioning System
National Maritime Electronics Association
Global Standard for Mobile Communications
General Propose Input
Carriage Return/Line Feed
Description
Bit per Second
VERSION 1.00
Page 3